Piranha® Anode Clamp

Intended to clamp on to plates, beams, bolts or rods

The Piranha® Anode Clamp from Imenco was developed to be mounted on to plates, beams, rods, bolts ore edges. We have five different basic clamp sizes that are available. Equipped with different jaw sizes that covers wide ranges from 5mm up to 165 mm. Piranha® S is ranging from 5 to 35 mm. The Piranha® M from 35 to 55 mm and Piranha® L from 55 to 90 mm Piranha® XL from 75 to 120mm Piranha® XXL 120mm To 165mm

Specifications

Piranha® Anode Clamp

Intended to clamp on to plates, beams, bolts or rods.

Introduction

Other connection details, like rods or bolts can be connected through special sets of jaws. The clamps will thereby fit to rods or bolt – axially or radially.

The main benefits of choosing an Imenco Retrofit Anode Clamp are the ease of installation and flexible use. The ROV will guide the clamp into place and the installation tool will tension the clamp to ensure a good connection.

Most subsea structures and components have some sort of plate as part of its design. This makes the Piranha® Clamp our versatile Imenco Retrofit Anode Clamp.

The clamp can hold anodes directly at a dedicated anode bracket or through a cable to a separate anode sled or anode cage.

Imenco has produced ROV installable Retrofit Anode Systems since 1999, which have proved to be very effective and installation friendly. The smart solution caters for compact design, enabling great flexibility in anode attachments.