Standard Spare Parts

HOME / Product /

105mm Dry Disconnect Coupling “Drytyt” Hose Unit – Available with either 2½” BSP or 3” BSP inlet with built-in swivel (see Range); 105mm outlet. Manufactured in 316 stainless steel fitted with Viton seal as standard. Options: Available in 70mm, 105mm, 119mm, 164mm with threaded (BSP or NPSL) inlet. Dry Disconnect Coupling ” Drytyt” Hose Unit […]

HOME / Product /

Dry Break Technology for Clean & Safe Refuelling. Quick Connectors for Easy Nozzle Changes These quick connectors provide a dry break at the hose end, making it easy to switch between nozzles depending on the type of refuelling required. Imenco highly recommends using 61-MM-GTP907 on your hose unit and 61-MM-GTP909 on both the pressure refuelling […]

HOME / Product /

2½” BSP Super Maxi Pressure Vacuum Releif Valve with optional Manual Vent Button or without. 2½” BSP male connection with 65mm nominal bore. Suitable for a pressure range of between 2 – 75 PSI (0.14 – 5.17 Bar) and a vacuum range of between 0 -24” Hg (0 – 0.81 Bar). Fitted with Forty seals […]

HOME / Product /

Equipped with durable stainless steel connections as standard, providing superior corrosion resistance and long-term reliability in demanding environments. High-Quality Fuel Hose for Helicopter Refuelling – ISO 1825 Our premium fuel hose, designed for helicopter refuelling, meets ISO 1825 standards and comes with stainless steel connections as standard. As specified in CAP 437, Chapter 7, Page 129, […]

HOME / Product /

Peak-Hold reading – The maximum differential pressure Gauges is measured during an operation automatically locks the piston so that the operator will have that information without actually having watched the gauge at the time. After the reading has been seen, the operator releases the piston by turning a knob. It is usually impossible for the […]

HOME / Product /

Designed to enable a steady, controlled flow of fluid, reducing wear and enhancing operational reliability. These pumps contain multiple vanes that can freely slide in and out of slots within the pump rotor. As the pump driver rotates the rotor, centrifugal force, push rods, and/or pressurised fluid cause the vanes to extend outward and press […]

HOME / Product /

Lubricated Air Motors come in seven basic models up to 9.5 HP (7,1 kW); motor speeds are variable from 300 to 10,000 RPM. Choose from hub, foot, face, NEMA C-Flange, or Metric D Series interface mountings and clockwise, counter-clockwise, or reversible rotations; four and eight vane models are also available.

HOME / Product /

Compliant with latest safety regulations, our grounding cables with breakaway devices meet the latest CAP 437 (8th edition) and HCA requirements. The latest edition of CAP 437 (8th edition) and the Helideck Certification Agency (HCA) mandates that all systems must be equipped with a grounding cable featuring a breakaway device. Breakaway devices have already been […]

HOME / Product /

Air Hose 6m Features:  Connector 61-MN-5340 Air quick connection, female Connector 10 mm Tube adaptor Hose Diameter ¼” Material Hose SBR Rubber  Material Connectors Stainless Steel  Hose Length 6 m  

Let us know if there is anything we can do
to help you!

Consent(Required)
This field is for validation purposes and should be left unchanged.